• First, you’ll need to check the monitor’s connection status.
• Go to Settings
• Then Wifi
• Then Information

• If a QR code is present, this means that the monitor has already been linked to a Wifi network.
• In this case, check that the Wifi icon is full and not crossed out.
• If yes, go to step 3

• If the Wifi icon is crossed out and/or the QR code is missing, click on “add network” or on the name of the previously registered network.

• The Extel Open 3K monitor will scan all compatible Internet boxes in the vicinity.
• Select the name of your Internet box by clicking on it.
• Then manually enter the wifi key for your internet box and confirm.
• WARNING: Your wifi key must have a minimum of 8 characters and a maximum of 18 characters. If your wifi key has less than 8 characters, please change it.
• If you’ve never changed the wifi key on your Internet box, or don’t know where to find it, please follow the instructions below.

• LiveBox 4 = The wifi key is visible by clicking on the i on the front of your Livebox.
• LiveBox 5 = The wifi key is located on the identification card and also on the label on the back of your Livebox.
• LiveBox 6 = The wifi key is visible in the Wifi settings accessible from the front screen.

• SFR NB6/NB7/NB8 = The wifi key is located on the label on the back of your SFRBox.

• Bbox Miami/ 4K = The wifi key is located on the label on the back of your Bbox. It’s the code on the WPA line.

Valid for Freebox Delta/Pop/Révolution/mini/One/4G+/Crystal

• Please download the “Freebox Connect” application available on the AppStore and Google Playstore.
• Select your Freebox model and log in.
• The wifi key for your Freebox is located in the “My Wifi Access” menu.

• If entered correctly, your monitor’s QR code will appear and the wifi icon will be fixed.
• In the event of an error, a brief message will be displayed during connection and the wifi icon will always be . Please repeat the procedure from step 2.

• Vеuіllеz vоuѕ munіr dе vоtrе ѕmаrtрhоnе еt lаnсеr lаррlісаtіоn ЕХТЕL Соnnесt (téléсhаrgеаblе grаtuіtеmеnt ѕur lе mаgаѕіn dе аррlісаtіоn dе vоtrе ѕmаrtрhоnе)
• During the entire procedure, if the application asks you for authorizations, please authorize them.

• Аѕѕurеz vоuѕ quе vоtrе арраrеіl nе ѕоіt раѕ déјà рréѕеnt dаnѕ l’аррlісаtіоn еt сlіquеz ѕur ајоutеr a рérірhérіquе.
• Ѕі vоtrе арраrеіl еѕt déјà рréѕеnt, іl vоuѕ еѕt néсеѕѕаіrе dе lе ѕuррrіmеr. Ѕélесtіоnnеz vоtrе арраrеіl, рuіѕ сlіquеz ѕur раrаmètrеѕ еt еnѕuіtе ѕuррrіmеr рérірhérіquе.

• Click on “My device is already connected to the Internet”.

• Click on “EXTEL OPEN 3K”.

• Click on “QR Code Scan”.

• Scan the QR code in the monitor’s connection status menu
• If you have difficulty scanning the QR code, please improve the surrounding lighting and move slightly away from the QR code to improve focusing.

• If the QR code is correct, the application should find your monitor. Click on “Add”.

• Please enter a user name for the device. This will be the name under which the device will appear in the application.
• Click on “Save”.

• Please enter a personal password to secure the device in the “NEW” and “CONFIRM” lines.
• This password must be made up of numbers only (please note that no two identical numbers should follow each other, e.g. 11,22,33, etc.).
• The device’s default password is 123456 and cannot be used.
• Then click on “Confirm”.

• The monitor is now saved and will appear under the previously saved name.
• Please select it to view live outdoor video.
• The association is over.

• Please take the second smartphone and launch the EXTEL Connect application (downloadable free of charge from your smartphone’s application store).
• During the entire procedure, if the application asks you for authorizations, please authorize them.

• Make sure your device is not already present in the application and click on add device.
• If your device is already present, you need to delete it. Select your device, then click on settings and then delete device.

• Click on “My device is already connected to the Internet”.

• Click on “EXTEL OPEN 3K”.

• Click on “QR Code Scan”.

• Scan the QR code in the monitor’s connection status menu
• If you have difficulty scanning the QR code, please improve the surrounding lighting and move slightly away from the QR code to improve focusing.

• If the QR code is correct, the application should find your monitor. Click on “Add”.

• Enter the password you defined in step 4, then click on confirm.

• Please enter a user name for the device. This will be the name under which the device will appear in the application. (it may be different from the one chosen in step 4).
• Click on “Save

• The monitor is now saved and will appear under the previously saved name.
• Please select it to view live outdoor video.
• The association is over