\

Self-learning sliding gate motorization Avidsen

Self-learning sliding gate motorization Avidsen

In this tutorial, you will find the procedure to launch a self-learning for an Avidsen sliding gate motorization

This tutorial is applicable for:

Avidsen - 114457 - Orea 500 Plus / Avidsen - 114459 - Zénia 250 / Avidsen - 114460 - Orea 550 / Avidsen - 114461 - Orea Connect / Thomson - 510063 - Swip 200 / Thomson - 510064 - Swip 500
Difficulty : Easy
Time required : 5 minutes
Number of steps :2
Mise à jour : October 2023

Tutorial steps:

Step 1: Start the self-learning process

Press the + key for 3 seconds

Step 2: Check the self-learning process

The gate will close, then open wide, then close again

Keep in touch
Youtube Linkedin

Follow us on social networks

About Avidsen
Support
Avidsen group brand
Copyright 2024 © All rights reserved Avidsen