\

Programming of remote controls on a CA2B9 card – Pedestrian/partial opening

Find in this tutorial the procedure to program and delete remote controls on a CA2B9 Avidsen card.

This tutorial is applicable for:

Difficulty : Easy

Time required : 1 minutes

Number of steps :7

Mise à jour : October 2023

PARTIAL OPENING: Press the ” -” key on the electronic board for 3 seconds (L1 lights up on the board).

PARTIAL OPENING: Press “+” once

(L2 lights up).

PARTIAL OPENING: Press the “SET” button on the card once (L1 and L5 will flash).

PARTIAL OPENING: Press the button on the remote control you want for one second. (All LEDs light up and go out).