\

Programming of remote controls on a CA2B9 card – Total opening

Programming of remote controls on a CA2B9 card – Total opening

Find in this tutorial the procedure to program and delete remote controls on a CA2B9 Avidsen card.

This tutorial is applicable for:

Avidsen - 114457 - Orea 500 Plus / Avidsen - 114459 - Zénia 250 / Avidsen - 114460 - Orea 550 / Avidsen - 114461 - Orea Connect / Thomson - 510063 - Swip 200 / Thomson - 510064 - Swip 500
Difficulty : Easy
Time required : 1 minutes
Number of steps :7
Mise à jour : October 2023

Tutorial steps:

Step 1: Enter the radio programming mode

FULL OPENING: Press the “-” button on the electronic board for 3 seconds (L1 lights up on the board).

Step 2: Start radio programming

FULL OPEN: Press the “SET” button on the card once (L1 and L5 will flash).

Step 3: Transmit from the remote control

FULL OPEN: Press the button on the remote control you want for one second. (All LEDs light up and go out).

Keep in touch
Youtube Linkedin

Follow us on social networks

About Avidsen
Support
Avidsen group brand
Copyright 2024 © All rights reserved Avidsen