To program a badge, the monitor must be connected to the Internet and linked to your smartphone.

• Check that the Wifi icon is full and not crossed out.
• In the event of an error , please review the connection by following the“Philips WelcomeEye Connect 3 Simplified Wifi Association” tutorial.

• Launch the Philips Door Connect application on your smartphone and stand in front of your intercom panel.

• Press your intercom to connect to intercom panel.

• Press to enter the monitor settings.

• Select “Badge management”.

• Press “Add badge”.
• Name your badge, then press “Next”.

• Pass your access badge on the right-hand side of your intercom panel.
• The intercom panel will beep 3 times to confirm registration.

• The application will send you a message confirming correct programming.

• A short passage in front of the intercom panel badge reader will power the electric strike plate output. The intercom panel will emit 1 beep.
• When the badge reader is held for 2 seconds, a dry contact is triggered to control a automatic gate opening mechanism. The intercom panel will emit 2 beeps.

• If you lose a badge, or wish to deactivate, you can delete it from the application’s badge management.
• Select your badge.
• Press “Delete”.
• Confirm deletion.