\

Deleting the radio memory of a CA2B9 card

Follow the steps in this tutorial to remove the radio memory from the card.

This tutorial is applicable for:

Avidsen - 114457 - Orea 500 Plus / Avidsen - 114459 - Zénia 250 / Avidsen - 114460 - Orea 550 / Avidsen - 114461 - Orea Connect / Thomson - 510063 - Swip 200 / Thomson - 510064 - Swip 500

Difficulty : Easy

Time required : 1 minutes

Number of steps :4

Mise à jour : June 2024

Explanations in video:

Tutorial steps:

Step 1: Enter the radio programming mode

Press the “-” key on the electronic board for 3 seconds (L1 lights up on the board).

Step 2: Select the memory delete mode

Press “+” twice (L3 lights up).

Step 3: Validate the deletion

Press “SET” once

ATTENTION!

The following step will delete all the remotes stored in the card. Remote controls that are located outside the property will no longer be able to control the motorization. It will be necessary to reprogram them.

Step 4: Validate the deletion

Hold down the SET key until you see the red lights animate on the map.